Net Popup Menu by Vista-Buttons.com v5.7

Get Adobe Flash player

Chempace International Distributors Industrial Solutions Municipality Solutions Septic & Grease Haulers Contract Packaging and Private Labeling by Chempace
  Need Help Reading - Use Our Instant Translator - Begin by Selecting Your Language!
Product Solution Menu
Industrial
Industry Solution Overview

Janitorial Main Page
All Metal Safe Cleaners
Ferrous Metal Cleaners
Heat Treat Cleaners
Vibratory Cleaners
Aqueous Rust Inhibitors
Floor And Maintenance Cleaners
Paint, Carbon & Phosphate Removers
Rust & Scale Removers
& Metal Brighteners
Ink and Coating Cleaners
Steam Pressure Washing Compounds
Plastic and Dunnage Cleaners
Bulk Transport - Tank/Tote Tank
Air-Dry Solvents
Car and Truck Wash
Defoamers
Specialty Products


Request A Quote or More Product Info

Other Industry Solution Links
Contract Packaging
Municipalities
Septic & Grease Haulers


Janitorial

Industrial Cleaning and Degreaser Solutions

WAXSTRIP #62
No-Ammonia Wax Remover
and
Multi-Purpose Detergent

Removes all floor waxes and emulsion floor finishes including metallized, detergent-resistant finishes. Also recommended for general maintenance cleaning of many washable surfaces; provides excellent cleaning and film-free rinsing.

To Remove Floor Waxes & Finishes

Use 4 to 16 ounces per gallon of water depending on the number of coats on the floor and the detergent-resistant properties of the wax or finish. Hot water helps but is not necessary.

Apply solution and let stand 5 to 15 minutes. Scrub with stripping pad or brush. Pick up solution and rinse with clear water.

Apply to an area of suitable size with mop, autoscrubber, floor machine with solution tank, or any other convenient method. Make sure all parts of the area remain wet for 5 to 15 minutes. If automatic scrubber is used, apply with vacuum pickup off.

While still wet, scrub with a pad or brush that is aggressive enough for quick, thorough removal but will not harm the floor material. Coarse floor pad are satisfactory for most jobs, 'nylo-grit' brushes or special 'build-up removal pads' may be used on some floors; bassine brushes are effective on some waxes but less effective on detergent-resistant metallized finishes such as Permakote.

Pick up with mop or vacuum or squeegee or autoscrubber; in rare cases, flushing with hose may be possible. Rinse thoroughly and let dry before recoating.

Vertical Surfaces

Apply full strength. Waxstrip #62 is thick enough to cling to vertical and overhead surfaces but thin enough to penetrate small crevices.

Use to clean coves, mop boards, kick plates, chair legs, file bases, exhaust vents, and similar surfaces where a thin liquid would run off. Apply with a paint brush or similar tool. Let stand until Waxstrip #62 has penetrated the dirt; check penetration by scraping with a finger nail or a small piece of wood or a screw driver. Scrub with suitable tools, wipe off dirt and rinse with clear water.

Other Applications

Waxstrip #62 is an excellent detergent for many maintenance applications. Suggested uses are:

Painted Surfaces Plastics Wood Siding
Light Fixtures Vinyl Aluminum Siding
Furniture Stainless Steel Oily Rags
Formica Chrome Wash Bowls
Leather Enamelled Steel Toilet Bowls

Properties & Use Precautions

Clear, amber liquid. Citrus odor. Biodegradable. Moderate viscosity. Alkaline liquid, contains silicate. Avoid contact with skin and eyes. In case of contact, flush for at least 15 minutes with water and get prompt medical attention. Keep out of reach of children.

Previous Page

 

Chempace Corporation | 339 Arco Drive - Toledo, OH 43607 | Toll Free at 800-423-5350 | Email chempace@chempace.com | Go Green! | Follow Chempace on Facebook and Friend Us Today!
Have More Questions? Request More Information From Chempace Today!

Chemace Affiliations and Memberships in Sanitation Industry
Chempace Products An American Made Product Supplier Select Chempace Products Now Available on Amazon.com New Approved EPA Safer Choice Designation by the EPA