Net Popup Menu by Vista-Buttons.com v5.7

Get Adobe Flash player

Chempace International Distributors Industrial Solutions Municipality Solutions Septic & Grease Haulers Contract Packaging and Private Labeling by Chempace
  Need Help Reading - Use Our Instant Translator - Begin by Selecting Your Language!
Product Solution Menu
Industrial
Industry Solution Overview

Janitorial Main Page
All Metal Safe Cleaners
Ferrous Metal Cleaners
Heat Treat Cleaners
Vibratory Cleaners
Aqueous Rust Inhibitors
Floor And Maintenance Cleaners
Paint, Carbon & Phosphate Removers
Rust & Scale Removers
& Metal Brighteners
Ink and Coating Cleaners
Steam Pressure Washing Compounds
Plastic and Dunnage Cleaners
Bulk Transport - Tank/Tote Tank
Air-Dry Solvents
Car and Truck Wash
Defoamers
Specialty Products


Request A Quote or More Product Info

Other Industry Solution Links
Contract Packaging
Municipalities
Septic & Grease Haulers


Janitorial

Industrial Cleaning and Degreaser Solutions

PENTATERJ
Steam Cleaning & Pressure Washing Compound
Heavy-Duty Floor Cleaning Detergent

A liquid detergent-solvent blend for use in any type of pressure-discharge or spray equipment where foam is acceptable. Use hot or cold. Use at any concentration on painted surfaces and bare metals including aluminum and other soft metals and alloys. Use on glass, plastics, rubber, ceramics, masonry, textiles, coated fabrics and similar. Use on floors where high accumulations of machine oils are a problem.

Typical Uses

Cars Walls Trash Carts Parts In Process Windows
Trucks Floors Air Ducts Heat Exchangers Skylites
Busses Ceilings Filters Grocery Carts Stairs
Planes Ramps Radiators Refrigerators Cages
Boats Washrooms Machinery Display Cases Barns
Tractors Kitchens Sumps Storage Bins Tarps
Fork Lifts Docks Bilges Storage Cans Awnings
Lawnmowers Tanks Hand Trucks Mobile Homes Lights

Active Components & Performance Properties

Contains buffered alkalies, organic chelant and sequestrant, corrosion preventative, Rust Inhibitors, organic solvent, and a synergistic blend of anionic and anionic wetting agents, penetrants and emulsifiers. Slightly viscous: it dissolves instantly in hot or cold water; its flow rate assures consistent , accurate dilutions when fed through a metering pump or suction device such as a venturi injector.

At recommended use dilutions it provides:

  • Quick wetting, penetration, dispersion, suspension and emulsification of dirt.
  • Solvent-booster action to remove the thin, adherent surface film which resists removal by detergents and pressure alone.
  • Foam sufficient to show the area sprayed.
  • Protection from rust and corrosion.
  • Quick, virtually spot-free rinsing due to low surface tension and deactivation of calcium and other hard-water ions.

Recommended Use Dilutions

Dilute in water to suit the job. The dilution required depends on the quantity and type of dirt, porosity of the surface, soak time allowed, pressure and temperature. Recommended per gallon of solution....

To remove light dirt from non-porous surfaces such as windows or ceramic tile walls

1 oz/gal = 1:127 water.

For most jobs on hard, non-porous surfaces

2 oz/gal = 1:63 water.

For oily conditions such as the dirt on machinery, exhaust fans, filters and ducts, and for porous surfaces such as tarps or concrete

6 oz/gal = 1:20 water.

For drive-thru car washes with power brushes:
Recirculation systems

1/2 oz/gal = 1:255 water.

Once-thru systems

1/4 oz/gal = 1:511 water.

Recommendations For Abnormal Conditions

If surface is so dirty that too much time is required to clean by normal methods, pre-spray at low pressure with full-strength Pentaterj, let soak up to 15 minutes, then pressure wash or steam clean at maximum pressure.

If dirt is unusually difficult to remove, such as some asphalts, tars, lubricants and resins, it is more efficient to pre-dissolve or pre-soften the dirt by applying a suitable Wash-Off Degreaser or Pre-Solv Solvent, let soak, then pressure wash or steam clean at maximum pressure.

If a thin, hazy film remains on the surface after normal washing, use the ACID-ALKALI SEQUENCE of application: At low pressure, flood the surface with Alumitone at 1:20 water, do not rinse; at low pressure, flood the surface with PENTATERJ at about 1:20 water; then pressure wash or steam clean at maximum pressure. CAUTION: To prevent etching of glass, do not use Alumitone at concentration over 1:20 water and neutralize Alumitone solution by applying PENTATERJ solution within 5 minutes.

Use Temperatures

Hot solutions, 120F to 180F, provide the most effective cleaning. "Cold" solutions, at ambient temperatures, are adequate for most types of dirt. For certain solid or thick substances which liquefy or soften at higher temperatures, hot solutions clean much faster and may be essential.

Charging Feed Tank

Most pressure washers and steam cleaners automatically dilute the feed solution with about 9 parts water. Use enough Pentaterj in the feed tank to allow for this automatic dilution. Example: If the equipment dilutes at 1:9 water, the concentration of Pentaterj in the feed tank must be 10 times the concentration desired at discharge.

Properties - DOT Class - Solution Properties - Precautions

State @ 701F

liquid

Freeze-Thaw Recovery

complete

Appearance @ 70F

clear, blue

Stability of Surfactants

biodegradable

Odor

mild

Fire Hazard

noncombustible

Specific Gravity

1.06

Solubility in Water

miscible

Viscosity @ 70F

30 cp

Solubility in Hydrocarbons

negligible

Freeze Point

26F

DOT-Hazard Label

none

 

Solution Properties * Dilution Ratio - Pentaterj: Water Pentaterj Water
1:20 1:63 1:127 1:255 1:511 Only Only
pH 11.1 10.8 10.2 8.8 7.9 13.0 7.3
Hardness, grains/gallon 0 0 0 0 1 0 8
Surface Tensions, dynes/cm 28 28 28 29 31 28 72
Wet Time @ 70F, seconds 4 4 6 40 46 ------ 9000
Wet Time @ 140F, seconds 3 4 5 32 40 ------ 8000
Foam, initial, cm 20+ 20+ 20+ 4 3 ------ ------
Foam after 5 minutes, cm 20+ 20+ 20+ 4 3 ------ ------
Cloud Point one none none none none none ------

*Test water...... pH 7.3. Hardness: 8 grains per gallon = 137 ppm: as Ca carbonate.
*Wet time........ Time to sink 2cm-OD ball rolled from 4x10cm strip of Kraft towel.
*Foam............. Height after 10-second severe agitation of 50ml in 6cm-ID cylinder.
*Cloud Point... Clear below, cloudy above. None = clear @ ambient to 180F.

Alkaline liquid. Avoid contact with skin and eyes, especially in undiluted form. In case of contact, flush with water: eyes for at least 15 minutes. For uses where hands must be immersed, wear rubber or neoprene gloves. KEEP OUT OF REACH OF CHILDREN.

Previous Page

 

Chempace Corporation | 339 Arco Drive - Toledo, OH 43607 | Toll Free at 800-423-5350 | Email chempace@chempace.com | Go Green! | Follow Chempace on Facebook and Friend Us Today!
Have More Questions? Request More Information From Chempace Today!

Chemace Affiliations and Memberships in Sanitation Industry
Chempace Products An American Made Product Supplier Select Chempace Products Now Available on Amazon.com New Approved EPA Safer Choice Designation by the EPA